Mobile viewing skills

When there are many components, the template can be viewed by sliding up, down, left and right.

The effect of sliding up and down is shown in the following figure:

Users can click the Refresh button to refresh the template, as shown in the following figure:

In the table, pinch-to-zoom is supported, as shown in the following figure:

The mobile terminal adds a gesture to exit, the finger is attached to the left side, and if you swipe to the right, the exit operation is performed.   

At present, the places that support left swipe exit are: dashboard interface , secondary directory interface , primary directory interface , and setting interface .

Note 1: Swipe left and right does not support page turning operations. 

Note 2: Only iOS supports left swipe to exit.

When there are many components, users can switch to landscape view to view the dashboard. By default, landscape displays only a single component. Support left and right switching components. As shown below:

If you want to switch the horizontal screen to view the dashboard effect, please refer to the document: Mobile template horizontal screen display

Note 1: Whether the mobile terminal supports switching between horizontal and vertical screens depends on the browser or integration method. If the browser or integration method used can turn on automatic rotation to switch between landscape and portrait, then the component can also switch between landscape display. Those that can switch between horizontal and vertical screens: WeChat, Safari, etc.; those that cannot switch between horizontal and vertical screens: DingTalk, etc.

Note 2: For versions of App and HTML5 mobile display plug-ins before 10.4.76, users can use the back button and the system back key to return the horizontal screen to the vertical screen. The back button cannot be removed.

  App and HTML5 mobile terminal display plug-in version 10.4.76 and later, users can only use the back button to exit the template, not for horizontal and vertical screen switching. This button cannot be removed.

The mobile terminal supports magnified viewing of components, and the button is suspended in the upper right corner of the component, as shown in the following figure:

Note: Horizontal and vertical screen switching is not supported in the magnified state. Turn off the zoom state to switch between landscape and portrait.

The mobile terminal supports modifying the size and style of the component zoom button. For details, please refer to the document: Global button settings

7.1 Individual components

The table on the mobile terminal supports page turning. When there is only one table in the dashboard, the page can be turned directly. As shown below:

7.2 Multiple Components

When there are multiple components, the table only supports page turning in the enlarged state. As shown below:

When opening a coordinate axis type icon, such as a line chart, a column chart, etc., press and drag your finger in the chart to view the corresponding data point prompts in real time, as shown in the following figure:

9.1 Chart Data Point Tips

When you click on the options with multiple jump, linkage, and drill functions, the field will pop up the existing function options, and you can select the corresponding function options. As shown below:

The dynamic effect is shown in the following figure:

9.2 Chart data points are silent 

Note: In FineBI versions after 2019-07-16, when users set a single linkage, jump, and drill option, they can directly realize linkage, jump, and drill without a prompt box.

9.2.1 Drilling

Preconditions:

1) Refer to the document to set the drill: normal data drill

2) When users create components on the PC side, they need to set the content format to empty under Graphic Properties > Prompt .As shown below:

Effect view:

The component needs to have only a single drill option and a single drill directory. If there are multiple drill options or multiple drill directories, a prompt box will still appear.

Note: If a component has any two or three of jump, linkage, and drill at the same time, a prompt box will also appear.

As shown below:

9.2.2 Jump

Preconditions:

1) Refer to the document setting jump: analysis template jump

2) When users create components on the PC side, they need to set the content format to empty under Graphic Properties > Prompt .As shown below:

Effect view:

There needs to be only a single jump option in the dashboard. If there are multiple jump options, a prompt box will appear as shown below:

Only one jump template is set, click to jump directly, as shown in the following figure:

Note: If a component has any two or three of jump, linkage, and drill at the same time, a prompt box will also appear.

9.2.3 Linkage

Preconditions:

Refer to the document to set linkage: linkage

Effect view:

There only needs to be a single linkage option in the dashboard. If there are multiple linkage options, a prompt box as shown below will appear:

There is only a single linkage option, and the effect is shown in the following figure:

Note: If a component has any two or three of jump, linkage, and drill at the same time, a prompt box will also appear.

9.2.4 Clear linkage

After BI 5.1.18 and the mobile terminal V10.4.998 version, after the page is linked, the linkage needs to be cleared. You can click the button " " at the bottom of the screen to realize it. Effect view:

Note: The effect of clearing the linkage is to clear the linkage of all components in the dashboard.

Preconditions:

Refer to the documentation to set up map drilling: Map Drilling

Effect view:

Drill down on the map, click on the city you want to drill down to, and select Drill down to drill down to the province. Click All in the upper left corner to drill up to the national data. As shown below:

11.1 Filter in the filter panel

Preconditions:

The user adds filtering components on the PC side. Reference Documentation: Overview of Filter Components

Effect view:

Click the funnel icon in the lower left corner of the dashboard to enter the filter component panel. As shown below:

11.2 Filtering within the Dashboard

Preconditions:

1) The user adds a filter component on the PC side. Reference Documentation: Overview of Filter Components

2) Set the mobile layout and display the filter component in the dashboard. Reference Document: Mobile Layout Section 3.1

Effect view:

Filtering can be done in the dashboard, as shown in the following figure: