Overview
Version
FineDataLink Version | Functional Change |
---|---|
4.0.20 | Scheduled Task supported the reading from and writing into the HP Vertica database. |
4.1.6.3 | Data Service supported the HP Vertica database. |
Application Scenario
FineDataLink supports connection to the HP Vertica database for data reading/writing using scheduled tasks and for releasing data services.
Restriction on Use
For details of the usage instructions, see HP Vertica Instruction.
Preparation
Version and Driver
Download the driver package and upload it to FineDataLink. For the specific steps of uploading the driver package, see Driver Management.
Supported Database Version | Driver Package |
---|---|
9.3.1 |
Connection Information Collection
Collect the following information before connecting FineDataLink to the database.
IP address and port number of the database server
Database name
Username and password of the database
Database pattern
Procedure
1. Log in to FineDataLink as the admin, choose System Management > Data Connection > Data Connection Management, and click New Data Connection.

Note: If you are not the admin, you can configure data connections only after the admin assigns you permission on Data Connection under Permission Management > System Management. For details, see Data Connection Management Permission.
2. Select the HP Vertica database.
3. Set Driver to Custom, select the uploaded driver mentioned in the Version and Driver section, and fill in the connection information.
You cannot set Pattern unless the database is connected. Click Click to Connect Database and then click Pattern.
4. Click Test Connection. If the connection is successful, click Save.