Surveillance Alert Setting is used to monitor space usage and trigger alerts upon increase anomalies.
Log in to FineDataLink as the admin and choose System Management > Intelligent O&M > Disk O&M.
Click Surveillance Alert Setting and enable Surveillance Alert Switch. After this function is enabled, the system automatically checks the disk at the surveillance frequency, and notifies O&M personnel if the available disk space reaches the alert threshold, as shown in the following figure.
The following table lists the surveillance alert settings.
Surveillance Frequency
The default surveillance frequency is 1 hour.
You can enter an integer ranging from 1 to 12.
If you enter other content that does not meet the condition, the setting cannot be saved.
Alert Threshold of root Directory's Disk Space
The default alert threshold of the root directory's disk space is 10 GB.
You can enter an integer ranging from 10 to 500.
Alert Threshold of temp Directory's Disk Space
Alert Threshold of Task Schedule Directory's Space
Alert Threshold of System Backup Directory's Space
Click Surveillance Alert Setting and enable Surveillance Alert Switch. After this function is enabled, you will be notified if the disk space surveillance alert is triggered.
Alert Notification Method: SMS Reminder, Platform Message, and Email Notification.
Alert notification content: Currently, the XXX directory's disk has only XXX GB available, which is less than the current alert threshold. Expand the disk capacity as soon as possible.
1. To use SMS Reminder, the SMS function must be enabled first. For details, see SMS.
2. To use Email Notification, the mailbox service must be configured first. For details, see Mailbox.
1. SMS reminder
2. Platform Message
3. Email Notification
滑鼠選中內容,快速回饋問題
滑鼠選中存在疑惑的內容,即可快速回饋問題,我們將會跟進處理。
不再提示
10s後關閉
Submitted successfully
Network busy