For details, see 4.2.14 Update Log.
4.2.14.4
Release date: 2026-01-29
1. Supported the COPY loading configuration for scheduled tasks and real-time pipeline tasks if the target end was a SQL Server database.
2. Added Synchronization Delay to the options of Notification Content in Result Notification.
3. Added a Write Latency indicator to the Read and Write statistics window of single tables in Historical Statistics of real‑time pipeline tasks.
4. Added a Log Parsing Latency indicator to Historical Statistics of real-time capture tasks.
4.2.14.3
Release date: 2026-01-22
1. Changed the storage location of the scheduled task configuration.
2. Added a Rule Strength setting item for inspection tasks.
3. Added two built-in parameters related to inspection tasks.
4. Included Inspection Passed (with Tables Violating the Weak Rule) in the notification content of inspection tasks.
4.2.14.2
Release date: 2026-01-15
Optimized the Event-Based Scheduling function:
Added a Timeout Policy setting item to the Timed Judgment configuration.
Added an Exception Notification setting item to the execution condition configuration.
4.2.14.1
Release date: 2026-01-07
1. Optimized real-time capture tasks by optimizing relationships between real-time capture tasks and data connections and the task execution logic, and supporting for viewing backfill records.
2. Fully upgraded the SQL editor function to support auto‑prompting for table names, field names, and other information with assisted completion, syntax checking, and error highlighting.
3. Optimized the parameter usage to allow passing parent task parameters to nested subtasks and using parameters as target table names when Target Table was set to Auto Created Table.
4. Supported data type modification for source fields from some app data sources.
5. Allowed viewing information of source tables during table adding (where incremental tables without primary keys were also displayed, which were grayed out and unselectable) for scheduled pipeline tasks.
For details, see 4.2.13 Update Log.
4.2.13.4
1. Supported connection to Server Message Block data sources for data reading and writing using scheduled tasks.
2. Optimized the JSON Generation operator:
Disallowed sub-arrays at any deeper level if an array is nested three levels deep.
Disallowed direct nesting of arrays, for example, [[1,2,3],[4,5,6]]).
Supported multiple parallel arrays at the same nested level. If sub-arrays contained multiple values and other fields outside the sub-arrays shared identical values, no data merging or deduplication would be performed, ensuring all data was preserved in the aggregation result.
Provided a draft autosave mechanism for the JSON-Template-Based Generation panel. The edit would be automatically saved after you clicked Save Draft or Generate.
3. Allowed selecting string fields as splitting keys in scheduled tasks with Parallel Read enabled.
4. Supported connection to SelectDB, Doris, and StarRocks data sources via the HTTPS protocol.
5. Forced the system to first use the FDL_EXTRACT_TABLE_DATA function in the target system for data fetching if Configuration Method in the SAP ERP Input operator was set to Table Selection. If this function did not exist, the system would use the RFC_READ_TABLE function.
6. Added a taskChannelSizeLimit parameter (which could be set under Task Control > Task Attribute > Advanced Attribute) for real-time tasks, which limited the maximum number of data records in the channel. For details, see Single Real-Time Task Management.
4.2.13.3
Release date: 2025-12-18
1. Supported parallel synchronization during full synchronization for real-time pipeline tasks.
2. Supported connection to Oracle physical standby databases (ADG mode) if the source end of a real-time task/real-time pipeline task was an Oracle database.
3. Renamed the WeCom Chatbot notification channel WeCom Group Message Push and applied this change to all relevant settings within the product.
4. Supported data writing to KingbaseES (Oracle) and SelectDB data sources using data-receiving APIs.
5. Added an Exceptional Detail Recording setting item for data inspection tasks, through which you could view details of exceptional data that failed to pass the inspection in the inspection report and quickly pinpoint exceptional data. You could also store exception details in a specified local directory on the server.
6. Added a Primary Key setting item in the configuration of CDC Input and Dimension Table Input operators to ensure data consistency between full and incremental phases, improving task performance and data accuracy.
4.2.13.2
Release date: 2025-12-11
1. Moved the original configuration content of Auto Table Creation Configuration to Case Format. Added an Encoding setting item to support automatic conversion of character encoding and collation.
2. Separated Auto Table Creation Configuration and Field Mapping Rule by tab for independent management.
3. Added Timeout Notification to Notification Content of scheduled tasks, through which you could set task timeout reminders.
4. Optimized the Jiandaoyun Output operator to support hard deletion.
4.2.13.1
Release date: 2025-12-04
1. Introduced a Scheduled Pipeline Task Invocation node, allowing you to invoke scheduled pipeline tasks within scheduled tasks.
2. Allowed copying scheduled pipeline tasks to specified locations.
3. Allowed enabling Parallel Read within scheduled tasks for GaussDB 100/GaussDB T data sources.
4. Provided prompts for scenarios not supported by implementation principles during real-time pipeline task configuration to solve the following issues (on the configuration page) encountered by users unfamiliar with the specific implementation principles of SQL Server databases:
The required fields did not appear in the field list.
Tables to be synchronized did not appear in the selection list.
For details, see Microsoft SQL Server Data Connection.
For details, see 4.2.12 Update Log.
4.2.12.4
Release date: 2025-11-27
1. Optimized the global parameter configuration by introducing Password-type static parameters and allowing limiting the available scope of global parameters.
2. Optimized the HDFS settings for Hadoop Hive data connections.
3. Allowed specifying the storage format to write data into Hadoop Hive tables.
4. Supported connection to KingbaseES (Oracle) data sources.
5. Supported connection to KingbaseES (PostgreSQL) data sources.
4.2.12.3
Release date: 2025-11-20
1. Introduced an OSS-HDFS option in the configuration of the Hadoop Hive data connection.
2. Removed the fetchsize configuration entry for the MySQL, Doris, StarRocks, SelectDB, and Alibaba Cloud AnalyticDB data sources.
4.2.12.2
Release date: 2025-11-13
1. Allowed calling stored procedures in databases to fetch data during the configuration of data query APIs.
2. Allowed setting data types for fields generated after parsing during the configuration of data-receiving APIs (General API Request Body).
3. Supported connection to Vastbase G100 (Oracle) data sources.
4. Added a Specified Column Name option in Value Source, enabling column selection by column name to supply parameter values.
5. Extended the application scope of Transaction Control to SelectDB and Doris data sources.
6. Allowed releasing data query APIs using the Informix data source.
4.2.12.1
Release date: 2025-11-06
1. Sorted the entries in Statistics by start time in chronological order by default. Allowed sorting them by clicking column headers.
2. Extended the application scope of Lineage Analysis to the YMatrix data source.
For details, see 4.2.11 Update Log.
4.2.11.4
Release date: 2025-10-30
1. Optimized permission check items for data sources in real-time pipeline tasks:
Added an Active Transaction Check item if the source end was an Oracle database.
Renamed the Supported Data Source Version check item Data Source Version Check.
2. Included Custom Time in the options of Incremental Sync Start Point when the source end of a real-time pipeline task was an Oracle database with Read Mode and Synchronization Type set to LogMiner and Incremental Synchronization Only, respectively.
4.2.11.3
Release date: 2025-10-24
1. Optimized the configuration page of real-time pipeline tasks.
2. Allowed restoring the pipeline to normal operation by clicking the Reset Task button to reset the real-time pipeline task when the data table changes or exceptions (such as log expiration and checkpoint failure) occurred.
3. Allowed adding, deleting, and editing tables, modifying the synchronization type, and adjusting task control settings of real-time pipeline tasks.
4. Allowed starting and pausing real-time pipeline tasks in Execution Record.
5. Allowed resetting and deleting real-time pipeline tasks, and modifying task control settings under O&M Center > Real-Time Pipeline > Task Management.
6. Applied the edit lock restriction to real-time pipeline tasks in Draft status only. Other task-level edits or edits of synchronization objects were not subject to the edit lock restriction.
7. Optimized data writing to ClickHouse databases using real-time pipeline tasks:
Identified and set the physical primary key of the source table as the sorting key of the target table automatically if Target Table was set to Auto Created Table. Allowed specifying the sorting key, which would be automatically assigned a NOT NULL constraint that could not be removed.
Identified and displayed the sorting key in the existing table automatically if Target Table was set to Existing Table. The sorting key would be used for primary key mapping in Write Method automatically.
8. Expanded the data sources supported by data inspection tasks to include Hive, DM, StarRocks, Doris, Greenplum, YMatrix, and SelectDB databases.
9. Allowed assigning the View and Edit permission on specific data inspection tasks in Data Inspection, or assigning the Authorization permission on Data Inspection to a user to make the user a sub-admin.
10. Optimized the display logic of the View Partition Key Setting button for data writing to existing partitioned tables.
11. Allowed editing the SQL statements in the pop-up window directly if you set Target Table of a scheduled task to Auto Created Table and clicked Manual Table Creation.
12. Optimized the DDL Change Detection function:
Included changes to primary keys, NOT NULL constraints, and remarks of the source table in the DDL change detection scope when Configuration Method in Data Source was set to Table Selection.
Added a one-click apply function, where the field name was used as the unique identifier (based on the Map Fields with Same Name logic) to compare the structures of the source and target tables. If any inconsistencies were detected, you could synchronize the source table structure changes to the target table with one click.
4.2.11.2
Release date: 2025-10-16
1. Supported an in-memory queue for the Data Reception function starting from V4.2.11.2, eliminating the need for Kafka deployment and transmission queue configuration.
2. Changed the default time range filtering conditions for Ranking by Failure Rate and Ranking by Average Duration under O&M Center > O&M Overview > Scheduled Task to Last 7 Days.
4.2.11.1
Release date: 2025-10-10
Disabled copying for Cloud App System data sources. You could create new data connections when multiple sources were required.
For details, see 4.2.10 Update Log.
4.2.10.4
Release date: 2015-09-25
1. Supported frontend configuration of common Kafka parameters.
2. Added configuration for enhancing Kafka fault tolerance.
3. Added configuration for optimizing Kafka disk storage usage.
4. Supported frontend configuration of common Kafka parameters during the configuration of Kafka data connections. 5. Allowed viewing the storage usage of the Kafka topic associated with the table being parsed in Real-Time Capture Task.
4.2.10.3
Release date: 2015-09-19
1. Optimized the File Input operator: Updated Sheet Name to Sheet Filter to support multi-sheet reading. Allowed selecting required fields to output. Allowed specifying the row and column range to read data from CSV files. Added built-in fields.
2. Optimized the File Output operator: Allowed outputting data as files of custom types, splitting data into multiple sheets by row count, and modifying names and types of output fields.
3. Renamed the original Invocation Task node Scheduled Task Invocation.
4.2.10.2
Release date: 2025-09-15
Added the Execution Monitoring function under O&M Center > Scheduled Task > Running Record to provide comprehensive oversight of execution records and proactive notification capabilities.
4.2.10.1
Release date: 2025-09-05
1. Allowed using parameters during the configuration of Database/Schema, Source Table, and Collection, which could significantly reduce repetitive work of database and table configuration, thereby improving data development efficiency and project reusability.
2. Allowed setting Read Mode to pgoutput when you read data from PostgreSQL databases using real-time data development tasks or real-time pipeline tasks
3. Optimized nodes involving field configuration: Supported field name modification, custom output fields, and so on.
4. Displayed the Registration Licence Version information of successfully registered projects under Registration Management > Registration Information.
For details, see 4.2.9 Update Log.
4.2.9.4
Release date: 2025-08-28
1. Allowed setting call limits both globally and per API. In the event of instantaneous high concurrent accesses, requests exceeding the set limit would fail fast.
2. Allowed adding alert rules per API. The notification would be sent once the configured alert conditions were met.
3. Supported data writing into GaussDB 100 data sources using data-receiving APIs.
4. Supported the configuration of field mapping rules for ClickHouse data sources in General Configuration.
5. Supported browsers based on the Chrome 86 kernel. For browsers running on older-version kernels, page display anomalies would occur, and only functional usability was guaranteed.
4.2.9.3
Release date: 2025-08-21
1. Added tab operations on the editing page of scheduled tasks. You could right-click a tab and choose to close the current task, other tasks, and all tasks. When too many tasks were open, causing visual clutter during tab switching, you could quickly close multiple tabs at once.
2. Supported quick node renaming by hovering the cursor over the node name on the node panel and clicking the xx icon.
3. Optimized the shortcut key page in scheduled tasks.
4. Watermarked empty canvases with shortcut hints and added tooltips to shortcut buttons.
5. Supported connection to Amazon data sources for data reading using scheduled tasks.
4.2.9.2
Release date: 2025-08-15
1. Allowed setting the encryption method when you configured an FTP data connection.
2. Allowed setting the maximum wait time to establish a connection when you configured an SFTP data connection. The connection would be closed, and a connection failure would be thrown if this threshold was exceeded.
Allowed setting the maximum duration to wait for a data response during transmission. Connections would be forcibly terminated if this threshold was exceeded.
3. For SSH data connections:
Supported the above settings for OpenSSH of V6.X or later versions.
Allowed setting the maximum wait time to establish a connection to the server when you configured an SSH data connection. Connection failure would be thrown if this threshold was exceeded. Allowed setting Authentication Method to Public Key.
4.2.9.1
Release date: 2025-08-07
1. Included cluster node details, pre-execution actions and timing, information and response time of SAP Input and API Input, Kettle invocation results, script connection information, version numbers, and the SQL queries used for table selection in execution logs.
2. Added a search icon to the Log tab page, enabling keyword-based searches within the logs.
3. Changed the default application path prefix to service (without publish).
4. Optimized the logic of Return Value Sorting of data query APIs in Data Service.
For GreenPlum, YMatrix, GaussDB 200, TiDB, AnalyticDB MySQL, Transwarp Inceptor, KingbaseES (MySQL), KingbaseES (Oracle), and Cache databases, Return Value Sorting must be configured if Pagination Query was enabled.
For Doris, StarRocks, and Impala databases, a prompt would appear if Pagination Query was enabled, suggesting you specify a valid field for sorting to ensure proper pagination.
5. Renamed the Public Cloud authentication method Online Registration.
6. Added a requirement that you must send the application project ID to the business personnel when authenticating the project via Local Machine Info.
7. Provided an interface in Spark SQL for custom function plugins, enabling seamless use of the developed plugin.
For details, see 4.2.8 Update Log.
4.2.8.5
Release date: 2025-07-31
1. Supported connection to Lark sheet data sources.
2. Expanded function support for the KingbaseES (SQL Server) data source.
3. Expanded function support for the KingbaseES (MySQL) data source.
4. Optimized the cleanup logic of Recycle Bin.
4.2.8.4
Release date: 2025-07-24
1. Supported the publication of data-receiving APIs using Data Service, which could receive data from upstream systems and Jiandaoyun, parse it, and write it to databases.
2. Supported Data Batching and Write Interval settings in Write Method.
3. Allowed adding description for fields in the array during API publication.
4. Supported HTTP Status Code configuration for data query APIs.
5. Allowed viewing and exporting dirty data details in Statistics.
6. Provided a high-version driver for the ClickHouse data source.
4.2.8.3
Release date: 2025-07-17
1. Supported connection to Cache data sources.
2. Allowed reading stored procedures from the InterSystems IRIS data source using scheduled tasks.
3. Added tables of real-time task information to LogDB.
4.2.8.2
Release date: 2025-07-10
1. Supported connection to GaussDB 100 and GaussDB T data sources.
2. Supported connection to KingbaseES (SQL Server) data sources.
3. Optimized names of the application data sources.
4.2.8.1
Release date: 2025-07-03
1. Split the original Application Data Source into multiple independent data sources and integrated them in Application System.
2. Allowed adding attachments in the Notification node when you selected Email as Notification Channel to meet data transmission needs.
3. Added a WeLink notification channel, enabling you to notify WeLink users of scheduled task information.
4. Included a Task Startup Time option in Sync Start Time in real-time pipeline tasks if the data source was Kafka, enabling synchronization from the task startup time to avoid synchronizing unnecessary historical data.
5. Moved Blocklist/Allowlist Rule to Rule Management.
6. Introduced application-level blocklist/allowlist settings in Data Service, building upon existing global configurations.
7. Increased the maximum number of columns that could be generated by the Row to Column operator from 100 to 300.
For details, see 4.2.7 Update Log.
4.2.7.4
Release date: 2025-06-26
1. Allowed processing and outputting data after distribution within a single Data Transformation node.
2. Allowed viewing the execution log and statistics of the Data Transformation node on the Data Transformation page.
3. Converted the DB Table Output (Transaction) operator to the Transaction Control function that lied in Write Method in the DB Table Output operator and the Data Synchronization node.
4. Added Table Emptying Method and Strategy for Primary Key Conflict settings when the write method was set to Write Data into Target Table After Emptying It.
5. Supported connection to the SelectDB V3.0 database.
4.2.7.3
Release date: 2025-06-19
1. Expanded the scope of applicable data sources for the Lineage Analysis function when Configuration Method in Data Source was set to SQL: Db2, SQLite, HSQLDB, Informix, DM, KingBase, TiDB, ClickHouse, PolarDB PostgreSQL, Presto, GaussDB 200, GBase8a, and Alibaba Cloud's MaxCompute (formerly referred to as ODPS).
2. Supported data reading from partition tables in Doris and StarRocks databases for Scheduled Task and Data Service.
3. Supported data writing into partition tables in Doris and StarRocks databases for Scheduled Task and Pipeline Task.
4. Allowed specifying the partition key when you set the target table of scheduled tasks or pipeline tasks to Auto Created Table.
4.2.7.2
Release date: 2025-06-12
1. Supported connection to GaussDB 100 and GaussDB T data sources with the following functions available:
Data reading/writing using Scheduled Task
Data writing using real-time tasks
Data writing using pipeline tasks
Data Service
Database Table Management
2. Allowed setting the message content in a card format when you set Notification Channel to Lark App Notification or Lark Chatbot.
4.2.7.1
Release date: 2025-06-05
Added a Group Summary operator to Real-Time Task in Data Development, enabling real-time aggregation calculations on data flows.
For details, see 4.2.6 Update Log.
4.2.6.4
Release date: 2025-05-29
1. Optimized the lineage parsing logic.
2. Added a Lineage Reset function in Database Table Management, by which you could refresh lineage at the data connection level.
3. Allowed viewing the reference relationships between data connections and resources on the Data Connection Management page.
4. Added the configuration methods SQL and Table Selection to the Dimension Table Input operator.
5. Allowed configuring the Flink engine under Data Development > Scheduled Task.
6. Allowed associating multiple real-time data sources using the Data Association operator.
7. Supported connection to WebSocket data sources for data reading/writing from/into WebSocket using real-time tasks in Data Development.
8. Supported connection to Ymatrix 6.x data sources.
9. Optimized the deletion function for Pipeline Task.
4.2.6.3
Release date: 2025-05-22
Optimized the O&M indicators of real-time capture tasks and pipeline tasks.
4.2.6.2
Release date: 2025-05-15
1. Updated the content on the O&M Overview page.
2. Refactored the development logic of data service APIs.
Updated the API creation steps to Service Content (Data Query) and API Configuration.
Allowed controlling the number of records per request.
Allowed enabling Pagination Query and specifying corresponding parameters.
Supported custom request parameters and custom structures of returned data.
3. Allowed modifying app path prefixes and app IDs in app paths under Data Service > App List.
4. In the table on a specific folder page in Data Connection Management:
Added a Test Result column.
Cancelled the display of the maximum number of idle connections in the Number of Idle Connections column.
5. Allowed setting Instance Execution Strategy for scheduled tasks configured with minute-level scheduling to keep the newest queuing instance only and skip others when the tasks got stuck.
6. Allowed configuring Execution Management for multiple scheduled tasks in batches under O&M Center > Scheduled Task > Task Management.
4.2.6.1
Release date: 2025-05-08
1. Supported connection to AnalyticDB for MySQL data sources, with the following functions available:
Data writing using Pipeline Task
2. Allowed adding fileName (whose value was the file name), filePath (the file path), and lastModifiedTime (the file modification time) fields in the File Input operator as output fields. Once added, these fields would be displayed during data previewing and participate in actual task execution.
Cancelled mandatory input of Filename Extension in the File Input operator.
3. Provided a JTDS driver package to support SQL Server 2012.
For details, see 4.2.5 Update Log.
4.2.5.4
1. Optimized the XML Parsing operator.
2. Optimized O&M Center.
3. Optimized Permission Management.
4.2.5.3
1. Optimized the Python operator.
2. Added geocoordinate conversion functions to Real-Time Task and the New Calculation Column operator in the Data Transformation node.
4.2.5.2
1. Optimized the JSON Generation operator.
4.2.5.1
Release date: 2025-04-03
1. Optimized Event-Based Scheduling.
2. Supported the Snowflake data source.
3. Supported the PI data source.
4.2.4.3
Release date: 2025-04-01
1. Added the Capture Task function.
2. Optimized the O&M of real-time tasks.
3. Supported global cleaning rules.
4. Added a Data Replacement operator to the Data Transformation node.
5. Supported the acquisition of actual parameter values at downstream nodes of Parameter Assignment for debugging.
6. Optimized the line separator in scheduled tasks in Data Development when the target end was the Doris or StarRocks database.
7. Unified the creation process for data services and inspection tasks.
4.2.4.2
Release date: 2025-03-14
1. Displayed creatable data source types dynamically based on the current project environment.
2. Displayed modules compatible with the current project environment when you hovered the cursor over the question mark icon next to a data source name during data connection creation.
4.2.4.1
Release date: 2025-03-07
1. Supported filtering conditions exceeding 72 characters for the SAP ERP Input operator and enforced that all conditional operators (such as =, >, and <) must be preceded by a space, such as WERKS ='0001' and WERKS = '0001'.
2. Allowed previewing result set data if Return Result Set was set to Query Result Set in Data Synchronization, DB Table Input in Data Transformation, and Parameter Assignment.
4.2.3.2
Release date: 2025-02-20
1. Limited the size of driver files uploaded in Driver Management to 200 MB.
2. Allowed enabling, disabling, editing, and deleting a scheduling plan if you had Management permission on all scheduled tasks included in this plan.
You could only view the scheduling plan if you had Management permission on some scheduled tasks included in this plan.
3. Eliminated the need to modify FineDB configuration before the use of Dataset Output.
4.2.3.1
Release date: 2025-02-13
1. Allowed setting row and column separators when you wrote data into StarRocks/Doris databases using scheduled tasks.
2. Added primary key restrictions for data writing into StarRocks databases using scheduled tasks: If the target table type is Primary Key Model and the source table had no primary key, you could not set the primary key to fields with decimal-type data in Data Destination and Mapping.
4.2.2.3
Release date: 2025-01-16
1. Included the SAP HANA data source in the supported scope of Parallel Read.
2. Supported data reading from Oracle 21c data sources using pipeline tasks.
3. Enhanced compatibility of the public data reading/writing function with the compute-storage separation multi-node architecture of FineBI 6.1.
4.2.2.2
Release date: 2025-01-10
This version included no new functions or optimization.
4.2.2.1
Release date: 2025-01-03
1. Supported connection to SelectDB data sources with the following functions available:
2. Added support for General Configuration - Auto Table Creation Configuration and General Configuration - Field Mapping Rule in cluster environments.
滑鼠選中內容，快速回饋問題
滑鼠選中存在疑惑的內容，即可快速回饋問題，我們將會跟進處理。
不再提示
10s後關閉
Submitted successfully
Network busy