Mobile Viewing Tips

When there are many components in the template, you can scroll up, down, left, and right to view them.

The scrolling effect is shown in the following figure.

You can click the refresh button to refresh the template, as shown in the following figure.

Note:

For details about the settings and instructions of the refresh button, see section "Refresh Setting" in Template Setting.

Pinch-to-Zoom

In the table, pinch-to-zoom is supported, as shown in the following figure.

Gesture exit is added on the mobile terminal. Place your finger on the left side, and swipe to the right to exit.

Currently, the pages that support swiping right from the left edge to exit are: dashboard page, second level directory page, first level directory page, and settings page.

Note:

1. Page-turning cannot be implemented through swiping left or right.
2. Only iOS supports swiping right from the left edge to exit function.

The mobile terminal supports zooming in to view components, and the button floats in the upper right corner of the component, as shown in the following figure.

The mobile terminal supports modifying the size and style of the component zooming in button. For details, see: Full-Screen Button Setting.

Single Component

Tables on mobile terminals support page turning. When there is only one table in the dashboard, the page can be turned directly, as shown in the following figure.

Multiple Components

When there are multiple components, the table only supports page turning in the zooming in state, as shown in the following figure.

When opening tables of the axis type, such as line chart, column chart and other charts, press and hold your finger in the chart and drag it to view the corresponding data point prompts in real time, as shown in the following figure.

Chart Data Point Prompts

When you click the option with multiple functions like jump, linkage, and drilling, a box of the existing functions of this field will pop up. You can click the required function option, as shown in the following figure.

The dynamic effect is shown in the following figure.

Chart Data Point Without Prompts

Drilling

Prerequisite

1. Drilling has been set by referring to Common Drilling.

2. The content format has been set to empty under Graphics Property > Prompt when you create components on the PC

Effect Display

No prompt box will pop up when the component only has a single drilling option and a single drilling directory, as shown in the following figure.

If multiple drilling options or multiple drilling directories are available, prompt boxes will still pop up.

Note:

If a component has any two or three of the jump, linkage, and drill-down functions, prompt boxes will also appear.

Jump

Prerequisite

1. Set jump referring to Jumping to Another Dashboard.

2. The content format has been set to empty under Graphics Property > Prompt when you create components on the PC

Effect Display

No prompt box will pop up when there is only a single jump option in the dashboard. If there are multiple jump options, prompt boxes will appear, as shown in the following figure.

For templates with only one jump option configured, clicking the option for direct jump, as shown in the following figure.

Note:

 If a component has any two or three of the jump, linkage, and drill-down functions, prompt boxes will also appear.

Linkage

Prerequisite

You have set linkage by referring to linkage.

Effect Display

The following figure shows the dashboard linkage effect.

Note:

If a component has any two or three of the jump, linkage, and drill-down functions, prompt boxes will also appear.

With HTML5 Mobile Display Plugin (V11.0.82 and later versions), you can click tables to trigger the linkage, and the display effects of the corresponding table cell are optimized, as shown in the following figure.

Clear Linkage

When the pages are linked and the linkage needs to be cleared , you can click the  button at the bottom of the screen to clear the linkage. Effect Display

Note:

The preceding operation will clear the linkage of all components in the dashboard.

You can also click the linked data again to clear the linkage on mobile terminals with V11.0. 85 and later versions.

Prerequisite

You have set map drilling by referring to Map Drilling.

Effect Display

Drilling the map: Click the city you need to drill, select Drill, and you can drill to the province. Click All in the upper left corner to drill back to the national data, as shown in the following figure.

Filtering in the Filter Component Panel

Prerequisite

You add the filter component on PC. For details, see: Filter Component.

Effect Display

Click the funnel icon in the lower left corner of the dashboard to enter the filter component panel, as shown in the following figure.

Filtering within the Dashboard

Prerequisite

1. You have added filter components on PC. For details, see: Filter Component.

2. Set the layout of the mobile terminal and display the filter components in the dashboard. For details, see section "Mobile Layout Entry" in Mobile Layout.

Effect Display

Filtering can be performed within the dashboard, as shown in the following figure.

With HTML5 Mobile Display Plugin (V11.0.82 and later versions), you can long press chart data to display corresponding details, as shown in the following figure.

With HTML5 Mobile Display Plugin (V11.0. 92 and later versions), the components and dashboard content released by BI can be previewed on the mobile terminal, as shown in the following figure.